Larva X 100mm Crazybee F4 PRO V3 0 2-3S 2 5 Inch FPV Racing Drone BNF w Runcam Nano2 Camera Compatible Flysky Receiver

New product

$196.66

  • Frsky NON-EU RX
  • Flysky RX
  • DS RX
  • Frsky receiver
  • Crossfire RX
Weight50g/1.75oz(without battery)
Model NumberLarva X
TypeSet1, Set2, Set3, Set4, Set5(Optional)
Colorblack
Size88x88x45mm/3.46x3.46x1.77in(without propellers)
MaterialComposite Material
Tool SuppliesLarva X Frame
Remote Control Peripherals/DevicesLarva X Frame
Four-wheel Drive AttributesAssemblage
For Vehicle TypeHelicopters
Upgrade Parts/AccessoriesLarva X Frame
RC Parts & AccsLarva X Frame
Wheelbase100mm
Name100mm 2-3S 2.5 Inch FPV Racing Drone
Drone VersionBNF ( With Receiver & Without Battery)

Larva X 100mm Crazybee F4 PRO V3.0 2-3S 2.5 Inch FPV Racing Drone BNF w/ Runcam Nano2 Camera Compatible Flysky Receiver

 

 

Features:
1.Powerful & Smoothly:New Crazybee F4 PRO V3.0 AIO Flight controller 2-4s Lipo compatible.
2.Betaflight OSD Support:Easy to get RSSI, Voltage ,current from your goggles.
3.High Performance:Camera angle adjustable, VTX power switchable 25mw~200mw.
4.Smartaudio Ready:Change VTX bands, powers, channels via OSD.
5.Receiver Option:Frsky D8/ Flysky / DSMX / Frsky RXSR/ TBS CRSF 
Diamond VTX Ready.

Descriptions:
1.Compatible both for 2-3S Lipo/LIHV.
2.Made of high quality material, strong and durable.
3.Small size, light weight and portable.

Specifications:
Model:Larva X
Name:100mm 2-3S 2.5 Inch FPV Racing Drone 
Wheelbase:100mm
Size:88x88x45mm/3.46x3.46x1.77in(without propellers)
Weight:50g/1.75oz(without battery)
Drone Version:BNF ( With Receiver & Without Battery)
Color:Black
Type:Set1, Set2, Set3, Set4, Set5(Optional)
Set1: Crazybee F4FR V3.0 PRO FC built-in Frsky NON-EU RX
Set2: Crazybee F4FS V3.0 PRO FC built-in Flysky RX
Set3: Crazybee F4FS V3.0 PRO FC with DSM2/DSMX RX
Set4: Crazybee F4 V3.0 with external Frsky RXSR receiver
Set5: Crazybee F4 V3.0 with external TBS Crossfire Nano RX

Happymodel EX1103 7000KV Motor:
Mode:EX1103
KV Options:KV7000
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:3mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5x16mm
Weight:3.7g

Crazybee F4 Pro V3  Flight Controller:
(Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware Target:CrazybeeF4FR
(Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware Target:CrazybeeF4FS
(No RX version) CRAZYBEE F4 PRO V3.0 Firmware Target:CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor:MPU-6000 (SPI connection)
Board Size:28.5x 28.5mm
Power Supply:2-4S battery input (DC 7-17V)
Built-in 10A (each) Blheli_S 4in1 ESC Dshot600 ready
Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
No RX version need to add external Receiver
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 70A
Current meter scale set to 470
Built-in 5V 1A BEC
Built-in voltage detection

Onboard 10A 4in1 ESC:
MCU Upgraded to EFM8BB21
Power Supply:2-4S LiPo/LiPo HV (7v/17v)
Con. Current:10A
Burst Current:12A (5S)
Support BLHeliSuite programmable
Factory Firmware:F_H_40_REV16_5.HEX
Default Protocol:DSHOT600

Onboard Frsky D8 Receiver Version
( Internal Frsky NON-EU receiver Version):
SPI BUS Receiver
Frsky D8/D16 Switchable
Compatible Non EU Transmitter both D8 and D16 mode
Channels:8ch or 16ch
Failsafe Support
No Ground Interference ( Transmitter and receiver 1 m from the ground):300m

Internal Flysky Receiver Version:
SPI BUS Receiver
Protocol:AFHDS and AFHDS-2A Switchable
Channels:8ch(AFHDS) or 14ch(AFHDS-2A)
No Ground Interference ( Transmitter and receiver 1 m from the ground):300m
Failsafe Support

External TBS Crossfire Receiver Version:
CRSF Protocol , Official TBS transmitter compatible

External DSMX Receiver Version:
Frequency Range:2.403-2.479Ghz
Input Power:3.3V -- 5V
Response Ttime:22ms / 11ms
Resolution:1024/2048
Display Method:LED
Operating Voltage:3.3V
Working Current:60MA
Size:18mm*13mm*5mm
Weight:0.9 g
Antenna Length:30mm
Data Format:Serial Port
Protocol:DSM2/DSMX
Distance:No ground interference (1 m from the ground ) more than 300m

External Frsky RXSR Receiver Version:
Weight:1.5g
Number of Channels:16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)
Operating Voltage Range:3.5V~10V
Operating Current:70mA@5V
Firmware Upgradable
Compatibility:FrSky X Series modules and radios in D16 mode 
Could support Frsky New ACCST Protocol ( Upgrade firmware) 

Happymodel Diamond_VTX:
Output Power:25~200mw switchable
/* */